|
Hamilton Range Specification - Sink Units All Stainless Steel construction, manufactured from Stainless Steel - type 304. All units have 50mm turn down with 20mm anti drip edge to front and both ends, complete with 60mm upstand to rear and 20mm tile return. Standard size bowls are welded to the top to give a single seamless unit. Tops are prepared to accept both 1/2" or 3/4" taps. All bowls are fitted with 38mm waste and upstand strainer. Full length Stainless Steel - type 304, undershelf fitted as standard and fully welded to Stainless Steel legs - type 430. Rear legs inset 100mm. Alternative sink sizes and bowl sizes are available on request at extra cost. Bowl Sizes available are: 400 x 400mm or 500 x 400mm - available in 250mm or 300mm deep.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Stellex's policy is one of continuous improvement and we reserve the right to change specification without notice |
Home |
Products |
About Us |
Contact Us |
Design Service | Location |
|
Special Offers |
|
© Stellex Ltd. 1999-2000. All rights reserved. |
Site designed & Maintained by Dust Web Services |
|||