Sterilizing Sinks

Specification

 

Tops are manufactured from 1.5mm Stainless Steel - type 304 and have a 50mm turn down to front and two sides with a 60mm upstand with a 20mm tile return to the rear. 

All bowls are manufactured from Stainless Steel and are welded to the top to form a seamless unit with all joints being polished. Sterilizing bowls are supplied complete with 38mm waste valve and Bowl Cover. 

 

 

Wash bowls supplied with 38mm upstand strainer and overflow. Top and bowls are mounted on square section Stainless Steel tube - type 304 and fitted with Stainless Steel legs - type 430, with adjustable feet.
Sterilizers are thermostatically controlled to operate at 85(C unless specified otherwise.

 

Model Dimensions Loading
S.S.S.E. 24 2400 x 700 x 850 6 kw
S.S.S.G. 24 2400 x 700 x 850 20,000 Btu/hr
S.S.S.E. 30 3000 x 700 x 850 6 kw
S.S.S.G. 30 3000 x 700 x 850 30,000 Btu/hr
S.S.S.E. 36 3600 x 700 x 850 6 kw
If a smaller sterilising bowl size 500mm x 500mm x 380mm is required then the loading would be 4 kw 

 

Extras
Elevated Basket Shelf
3 Phase Immersion Heater
Sink Bowl Cover
1/2" Pillar Taps

 

Bowl Sizes and Loadings
Sterilizing Bowls Loading Rinse Bowls
760 x 510 x 380mm 6 Kw 760 x 510 x 300mm
500 x 500 x 380mm 4 Kw  610 x 460 x 300mm

 

 

Stellex's policy is one of continuous improvement and we reserve the right to change specification without notice
Home
Products
About Us
Contact Us
 Design Service Location
E-mail
Special Offers

© Stellex Ltd. 1999-2000. All rights reserved.

Terms

Site designed & Maintained by

Dust Web Services